Laying Down and Putting Away Court Armor Tiles: A Step-by-Step Walkthrough
Two ways to lay the floor, one right way to load the cart, and the small habits that keep your tiles protected between events.
Enhance Mats
Aug 1, 2026, 3 min read
Getting tiles onto a gym floor should not feel like a puzzle, and putting them away should not be a guessing game. This walkthrough covers how to deploy and store Court Armor Gym Floor Tiles, and everything here applies just as well to Enhance Mats Custom-Color Heavy Weight Tiles. The process is the same for both, so there is only one set of steps to learn.
Choosing a Deployment Pattern
Gyms come in different sizes, shapes, and layouts, which is why tile can be laid in more than one way. Pick the pattern that suits your space and stick with it from the first tile to the last.
Pattern One: Stacked Brick
In this layout, tiles go down in a brick pattern. Begin by squaring off the first corner, and keep every edge aligned as you work outward. That corner is what everything else is measured against, so it is worth getting right.
Pattern Two: Single Basketweave
This pattern follows five steps:
- Move the loaded cart to the spot where deployment will begin.
- Pick up the first tile and carry it to the edge where you are starting, so you can square off the corner.
- Line the first tile up with a straight edge or a reference line. This sets the alignment for every tile that follows.
- Place the second and third tiles perpendicular to the first.
- Repeat across the whole area.
Done properly, either pattern should leave you with a system that looks virtually seamless, and the tile can be deployed in under an hour.
Loading Tiles Onto the Storage Cart
How you stack the tiles matters nearly as much as how you lay them. The goal is to keep the top-cloth surface from rubbing against itself while the tiles wait for the next event.
- Place the first tile on the cart with the top-cloth side up.
- Place the second tile with the top-cloth side down.
- Keep alternating the orientation with each tile, which protects the top cloth in storage.
- Line up the edges of every tile as you stack.
- Once the loaded cart has been wheeled to its storage spot, remove the handle so it does not bend or deform the tile edges.
Watch the Walkthrough
If you would rather see it done, Enhance Mats has a video on its YouTube channel called "Gym Floor Protection: Step-by-Step Deployment and Storage of Court Armor Tile."
Frequently Asked Questions
Do these instructions work for Custom-Color Tiles? Yes. Custom-Color Tiles use the same process, so there is no separate procedure to follow.
Which pattern should I use, brick-lay or a straight-line start? Both produce a virtually seamless install. Brick-lay is the faster default for most rectangular courts, while a straight-line start gives you more control over alignment along a reference edge, which suits irregular layouts or tight sidelines.
Why alternate the tile orientation on the cart? It protects the finished surface from contact wear while the tiles are in storage.
Do I need to remove the cart handle? Yes, once the cart is at its storage location. A handle left in place can bend or deform the edges of nearby tiles.
Talk to the Team
Enhance Mats is the leading distributor of Facility Armor Court Armor Gym Tiles and Custom-Color Tiles. To get pricing or ask questions, request a quote or call 877-318-8625.
Enhance Mats, Inc. | www.EnhanceMats.com | Sales@EnhanceMats.com | 877-318-8625